Abstract
The inhibition effects of sodium silicate and polyphosphate on corrosion of carbon steel in a potable water supply have been studied using weight loss, electrochemical impedance and Tafel polarization measurements. In the water supply under test there were sufficient calcium ions, (220 ppm), to form the normal polyphosphates salts, which is a requisite for good protection. It was concluded that the inhibition efficiency of polyphosphate was higher than that of silicate. The synergistic inhibition effects of polyphosphate on the inhibition of silicate were studied. The results illustrated that silicates and polyphosphates can be useful as corrosion inhibitors for reducing the corrosion of carbon steel in potable water supply distribution systems. The optimal concentration for silicate alone was determined to be 11 ppm and for polyphosphate alone was 8 ppm. The optimum ratio of concentration for sodium silicate to sodium polyphosphate was 4 : 3.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
