Abstract
A method is presented for the measurement of arsenic(III) in natural waters using square wave cathodic stripping voltammetry at a hanging mercury drop electrode. Pre-concentration was carried out in 2 M HC1 in, the presence of 0.8 mM CuCl 2 at a potential of −0.4 V vs. Ag AgCl . The deposited intermetallic compound was reduced at a potential of about − 0.8 V vs. Ag AgCl . The square wave frequency was 70 Hz with a staircase step of 2 mV and a pulse height of 25 mV. The peak current decreased with scan number, however, this effect can be minimized by the addition of hydrazine. The detection limit is approximately 0.06 nM (5 parts per trillion) when a 10 min deposition time was used. The relative standard deviation was calculated as 8% ( n = 11) at 1 × 10 −9 M arsenic for l min period of deposition. The method was tested by the measurement of arsenic(III) in both river and sea water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
