Abstract
Abstract: This The influence of fibre reinforcement on crack propagation in concrete was studied . Thirty-five double torsion specimens, made with three types of fibres (fibre glass , straight steel fibres and deformed steel fibres ) were tested . The variables were the fibre volume and size of the fibres. The test results indicated that the resistance to rapid crack growth increased somewhat with increasing fibre content up to about 1.25% - 1.5% by volume. The degree of compaction had an enormous effect on the fracture properties .The fracture toughness increased with fibre content up to about 1.25% by volume, and then decreased , due to incomplete compaction. It was found that in this test geometry, fibres did not significantly restrain crack growth. It was also observed that once the crack had propagated down the full length of the specimen, the system changed from a continuous system to a discontinuous system, consisting of two separate plates held together by the fibre reinforcement. Different types of fibres did not significantly affect the fracture toughness. Keywords: Fibre glass, straight steel fibers, deformed steel fibers, fracture toughness.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
