Abstract

Safety at level crossings is a major concern for Finnish railways. Less than a quarter of all 4,061 level crossings are equipped with active warning devices, mainly barriers but also warning lights and bells. Especially at passive level crossings it is entirely up to the road user to know whether it is safe to cross the railway. However, the environment should support road users and infrastructure managers should provide conditions where safe behaviour is possible. Perhaps the most important criterion then concerns sight distance conditions at the level crossing. A minimum requirement is that a road user stopped before the level crossing must be able to traverse the railway in less time than it takes for an approaching train to arrive at the level crossing from the point where the road user can first see it. Examples of current sight distance guidelines and their reasoning in selected countries are described. A proposal for new Finnish sight distance guidelines is made. The proposal for required sight distances consists of a minimum sight distance from the road of 5-8 metres from the nearest rail to the railway, and a minimum distance at which a road user approaching the level crossing must be able to see it.

Highlights

  • Accidents at level crossings are a major safety issue for Finnish railways

  • SStop is stopping sight distance, which is the distance at which the driver approaching the level crossing must be able to see it so that the vehicle can be stopped at a distance dStop before the level crossing. dStop is typically a few metres from the nearest rail

  • When applied to sight distances safe crossing conditions means that each road user traversing the level crossing must be able to cross the track(s) in less time than it takes for the train to arrive at the crossing from the place where the road user can first see the approaching train

Read more

Summary

INTRODUCTION

Accidents at level crossings are a major safety issue for Finnish railways. At the end of 2009 there were 3,376 level crossings on the state railway network: 2,929 on main railway lines and 447 on secondary lines. At level crossings road users must be prepared to give way to trains. This is usually required by law, but it is a natural rule since it takes a lot more time and distance to stop a train than a car at similar speed. At active level crossings road users are informed about an approaching train with sound and light warning devices or barriers so that it is not necessary for them to see the train. Road users must be able to see the approaching train so far in advance that they can be certain that traversing the track is safe if there are no trains in sight. It is clear that adequate sight conditions from the road to the railway are a necessary precondition for level crossing safety, especially at passive level crossings

BASIC CONCEPTS
WT sin Z
BASIC PRINCIPLES FOR SETTING OF SIGHT DISTANCE REQUIREMENTS
Snow mobile or pedestrian
MEASUREMENT OF SIGHT DISTANCE
CALCULATION OF REQUIRED SIGHT DISTANCE
Level crossing with limited access Other
SUGGESTED NEW SIGHT DISTANCE REQUIREMENTS FROM ROAD TO TRACK
Findings
Longitudinal Gradient of the
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call