Abstract

A rapid and simple analytical method for the determination of ten chlorinated priority substances (hexachloro-1,3-butadiene, pentachlorobenzene, hexachlorobenzene, hexachlorocyclohexane isomers, heptachlor, and heptachlor epoxides) in fish samples using QuEChERS extraction, dual dispersive solid-phase extraction (dSPE) clean-up, and GC analysis was developed. For the extraction, two published extraction/partitioning procedures were evaluated, and the recoveries obtained for the analytes (in range 54–98 % with RSDs ≤15 %) were in favour of the conventional QuEChERS method. The use of the dual dSPE clean-up yields cleaner extracts than in the case of single dSPE, which enables the use of ECD for the detection of the analytes and simplifies the maintenance of the GC system. The method was optimised using homogenates of chub fish that is frequently sampled for monitoring purposes. The linearity of the method was evaluated using matrix-matched calibration curves (in the range 2–50 μg kg−1), and correlation coefficients (r2) in the range 0.9927–0.9992 and RSDs of the relative response factors (RRF) below the value of 20 % were achieved. LODs ranged from 0.5 to 1.1 μg kg−1, while LOQs ranged from 1.5 to 3.5 μg kg−1. The accuracy of the method was verified by the analysis of the NIST standard reference material SRM 1946 (Lake Superior Fish Tissue), and most of the analytes of interest presented good agreement with the certified values.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call