Abstract
In this study, we want to seek for the results from a study on a reservoir with a single sand body and vertical segmentation to simulate each sand layer individually by using FCM and Petrel software. The results indicated that the black oil simulator E100, the Cartesian coordinate system, the angular point grid and the full implicit solution were used in historical fitting. And plane by 50 for step, the plane was divided into six grids and was vertically divided into six simulation layers. After grid coarsening, the total is 181170. For the oil reservoir block, the fitting error of the cumulative oil production history is 8.65% and the fitting error of the moisture content is 3.42%. For single-well oil production, the mean error is 7.36%, and the mean fitting error of the moisture content is 4.37%. The residual oil remained on top of the thick oil reservoir channel sand after water flooding and is 50.63% of the total surplus geological reserves. Thus, water flooding can improve oil recovery in highly permeable zones. After polymer flooding in a thick reservoir with a top layer of channel sand, the residual oil was 39.26%, which is 11.37% lower than that after water flooding.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Research Journal of Applied Sciences, Engineering and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
