Determination of radium in water

Abstract

These detailed work instructions (DWIs) are tailored for the analysis of radium-226 and radium-228 in drinking water supplies from ground water and surface water sources and composites derived from them. The instructions have been adapted from several sources, including a draft EPA method. One objective was to minimize the generation of mixed wastes. Quantitative determinations of actinium-228 are made at 911 keV. The minimum detection level (MDL) for the gamma spectrometric measurements at this energy vary with matrix, volume, geometry, detector, background, and counting statistics. The range of MDL`s for current detectors is 0.07 to 0.5 Bq/sample. Quantitative determinations of radium-226 are made by counting the high energy alpha particles which radium-226 progeny emit using liquid scintillation counting (LSC). The minimum detectable activity (MDA) is 3.8 E-3 Bq/sample. The maximum concentration which may be counted on available instruments without dilution is about 2 E + 5 Bq/sample. Typically, this determination of radium in a 2 L sample has a yield of 80%. If radium-228 is determined using a 16 h count after 50 h grow-in, the typical MDL is 1 E-9 to 8 E-9 {mu}Ci/mL (1 to 8 pCi/L). If radium-226 is determined using a 2.5 h count after 150more » h grow-in, the typical MDA is about 1 E-10 {mu}Ci/mL (0. 1 pCi/L).« less