Abstract
A rapid and sensitive neutron activation method for the determination of platinum, palladium, iridium and gold in rocks is described. The procedure consists of thermal neutron irradiation of about 250 mg of sample, followed by chemical treatment of the rock, precipitation of gold and the platinum group elements with tellurium and high-resolution gamma-ray spectrometry with a hyper-pure Ge detector. Two different methods were used for the chemical treatment of the rock: aqua regia leaching and sintering with sodium peroxide. The procedures were evaluated by analysis of the certified reference material SARM-7 and the reference material CHR-Pt+. Sintering with sodium peroxide and precipitation with tellurium were more appropriate for the determination of Pd, Pt and Ir, giving results in good agreement (within ±10%) with literature values. For gold, aqua regia leaching gave more accurate results (relative errors from 0 to 6%). The detection limits for the analytical conditions employed were 0.1 µg kg–1 Au, 10 µg kg–1 Pd, 20 µg kg–1 Pt and 0.2 µg kg–1 Ir. The procedure employing fusion with sodium peroxide was applied to the analysis of the reference material CHR-Bkg and the concentrations of Au, Pt, Pd and Ir obtained are presented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.