Determination of organic, inorganic and particulate iodine in the coastal atmosphere of Japan

Abstract

A reliable method for the sampling and analysis of atmospheric iodine species was developed. The air filtering system consisted of a 0.4 μm Nuclepore® filter, 47 mm in diameter, for particulate collection followed by two, 47 mm in diameter, cellulose filters for inorganic iodine collection. The latter filters had been impregnated with 1N LiOH in a 10% glycerol-water mixture. The organic iodine was collected by two beds holding 0.2 g of fibriform activated charcoal produced from phenol resin. Supplementation of the charcoal with triethylendiamine (TEDA) enhanced the sorption ability for gaseous iodine. The filters were analyzed by neutron activation analysis. The background radioactivity could be reduced by using the fibriform activated charcoal due to the low content of impurities in the phenol resin. The background count for128I (443 keV) obtained from the fibriform activated charcoal was about one order of magnitude lower than that of the conventional granular one (plant origin). Approximate detection limits for particulate, inorganic and organic iodine were 1, 0.5 and 0.5 ng/m3, respectively, when 50 m3 of air was sampled by this system. The air was sampled at two locations along the coast of Ibaraki, Japan. The concentration ranges of particulate, inorganic and organic iodine were 0.3–3.4, 1.2–3.3 and 7.8–20.4 ng/m3, respectively. Almost 90% of the atmospheric iodine was in a gaseous form in which organic iodine was dominant.