Abstract
In this study, a numerical analysis of an ejector for micro combined heat and power system based on 18 kW Solid Oxide Fuel Cell (SOFC) using methane as fuel is presented. An ejector design, which reflects the real system conditions in the view of the flow characteristics, is provided and the ejector performance is numerically investigated for various methane pressure to exhaust pressure ratios and methane inlet temperatures. The results show that the fuel inlet temperature and the pressure ratio of the methane to exhaust significantly affect the steam to carbon ratio (STCR) and entrainment ratio. The higher pressure ratio and methane temperature allow a high entrainment ratio and STCR, but as pressure ratio and methane temperature increase, STCR and entrainment ratio remain unchanged after a specific value. 1140 different scenarios related with the inlet and outlet pressures of the ejector and methane temperature are created to determine the optimum operating conditions. The simulations show that the optimum methane inlet pressure is 7 bar and exhaust pressure is 1.159 bar for the ejector geometry of the interest. The entrainment ratio and STCR are determined as 2.05 and 0.92, respectively at this optimum scenario.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
