Determination of Optimal Ball-Burnishing Parameters for Plastic Injection Moulding Steel

Abstract

The objective of this study is to determine the optimal plane ball-burnishing parameters for plastic injection moulding steel PDS5 on a machining centre by utilising the Taguchi's orthogonal array method. The design and manufacture of a burnishing tool are described. Four burnishing parameters, namely the ball material, burnishing speed, burnishing force and feed, were selected as the experimental factors in Taguchi's design of experiments to determine the optimal burnishing parameters which have the dominant influence on surface roughness. The optimal burnishing parameters were found after carrying out the experiments specified by Taguchi's L 18 orthogonal table, by the analysis of variation, and by a full factorial experiment. The optimal plane burnishing parameters for the plastic injection moulding steel PDS5 were a combination of a tungsten carbide ball, a burnishing speed of 200 mm/min, a burnishing force of 300 N and a feed of 40 μm. The surface roughness R a of the specimen can be improved from about I μm to 0.07 μm by using the optimal burnishing parameters for plane burnishing.