Abstract

A simple method is proposed for miconazole determination in pharmaceutical creams, based on extraction and second derivative spectrophotometry. In the presence of sodium lauryl sulfate (0.5%) and sulphuric acid (0.4 mol l −1), the miconazole and internal standard (IS) (methylene blue) were extracted to 100 μl of methylene chloride. The organic phase was evaporated in the nitrogen stream and the dry residue was dissolved in methanol (1.5 ml). The analytical signal was obtained as the ratio between second derivative absorbances measured at 236.9 nm (miconazole) and at 663.2 nm (IS). The use of IS in such multi-stage procedure enabled quite good analytical performance in calibration range 50.0–400 mg l −1: linear correlation coefficient 0.9995, precision (measured as CV for ten replicates) at 50.0 mg l −1 and at 400 mg l −1 of miconazole was 1.5 and 0.5% respectively. Four commercial pharmaceutical creams were analyzed and the results obtained were in good agreement with the results obtained by reversed-phase high performance liquid chromatography (HPLC).

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.