Abstract
A bulk modified electrode prepared by pressing a mixture of carbon powder and diphenylcarbazone at 15.2 MPa was used for the determination of mercury in aqueous solutions. Mercury(II) ions are concentrated by complexation with the modifier in acidic (HNO3) solution. After exchange of the medium for 1 M HCl and 1 M CaCl2, mercury is reduced at −0.8 V vs. SCE. The signal is generated by anodic stripping in the differential-pulse mode. The calibration graph is linear in the range 5×10−8−5× 10−6 M with a relative standard deviation of 7%. After enrichment for 10 min the detection limit is 5×10−8 M. Silver, chromate and strong complexing agents interfere. The use of the electrode to determine the labile fraction in mercury speciation is discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.