Abstract
Fatigue crack initiation usually starts from defects or inclusion (s) in the material in the zone of stress concentration. The stress concentration zone can be at the surface of the specimen or inside the material. The fatigue crack starts to propagate, depending on stress amplitude, if the range of the stress intensity factor is higher than the fatigue threshold. The aim of this paper is to present the procedure for determining the fatigue crack initial stage by using the Wöhler S-N curve and the fatigue crack propagation parameters obtained by experiment for the loading range R=-1. Determination of the fatigue initial stage has been determined by the analysis of tensile smooth specimens and notched bending specimens. Results show that linear elastic fracture mechanics is applicable in order to establish a model for fatigue crack propagation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
