Determination of hexavalent chromium by using speciated isotope-dilution mass spectrometry after microwave speciated extraction of environmental and other solid materials

Abstract

Precise and accurate determination of hexavalent chromium in different types of solid environmental sample is regarded as a technical challenge with significant potential error if historically accepted methods are used. Microwave-assisted alkaline extraction (0.5 mol L(-1) NaOH + 0.28 mol L(-1) Na2CO3) followed by anion-exchange chromatographic separation and inductively coupled plasma mass spectrophotometric detection has been shown to provide accurate and precise results. To obtain a better understanding of potential species conversion during and/or after extraction steps, speciated isotope-dilution mass spectrometry (SIDMS) (EPA Method 6800) metrology has been successfully applied as a diagnostic tool with the modified accompanying extraction version of EPA Method 3060A. In our study, aggregate materials distributed over a large area of a major western US state were found to contain a high concentration of total chromium (195 +/- 13 to 709 +/- 19 microg g(-1)) and significant amounts of Cr6+ (141 +/- 6 to 341 +/- 29 microg g(-1)) which are at least three orders of magnitude higher than the US EPA threshold limit (0.5 microg g(-1)). Sediment samples from a major western US state, studied independently, were found to contain less (1.77 +/- 0.34 microg g(-1)) or no Cr6+ in the presence of significant total chromium.