Determination of heavy metals (Pb, Cd, Cu, Zn, Cr) in sedimentary reference materials with IDMS: total concentration and aqua regia soluble portion

Abstract

The total concentration and the aqua regia soluble portion of traces of Pb, Cd, Cu, Zn, and Cr are determined with isotope dilution mass spectrometry (IDMS) in three different types of sediments using a thermal quadrupole instrument (THQ). The results are compared with those obtained by other methods during a certification project to establish these sediments (BCR 277, BCR 280, BCR 320) as standard reference materials. The IDMS (THQ) results are in good agreement with the preliminary certification values and the results of two other laboratories, which applied IDMS using magnetic sector field mass spectrometers. Significant differences between the different analytical methods were found for the total Pb concentration, which could be explained by adsorption and coprecipitation effects during the chemical pretreatment of samples. Using aqua regia instead of HF/HNO3 for the decomposition of sediments, only 65%–95% of the total Pb and 60%–90% of the total Cr could be dissolved. On the other hand, only a small or negligible portion of Zn, Cd, and Cu could not be dissolved by aqua regia. The IDMS values for the aqua regia soluble Cr portion are significantly higher compared to the results of other methods. This can be explained by adsorption effects.