Abstract
AbstractThe effective heat conductivity (λ) of reacting melter feed affects the heat transfer and conversion process in the cold cap, a layer of reacting feed floating on molten glass. A heat conductivity meter was used to measure λ of samples of a cold cap retrieved from a laboratory‐scale melter, loose dry powder feed samples, and samples cut from fast‐dried slurry blocks. These blocks were formed to simulate the feed conditions in the cold‐cap by rapidly evaporating water from feed slurry poured onto a 200°C surface. Our study indicates that the effective heat conductivity of the feed in the cold cap is significantly higher than that of loose dry powder feed, which is a result of the feed solidification during the water evaporation from the feed slurry. To assess the heat transfer at higher temperatures when feed turns into foam, we developed a theoretical model that predicts the foam heat conductivity based on morphology data from in‐situ X‐ray computed tomography. The implications for the mathematical modeling of the cold cap are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
