Abstract
A method for headspace solid-phase microextraction (HS-SPME), followed by gas chromatography-mass spectrometry (GC-MS) analysis was established for the determination of five commonly used synthetic musks in perfume. Two polycyclic musks (celestolide and tonalide) and three nitro musks (musk ambrette, musk xylene and musk ketone) were used as analytes in the optimization of the analytical method. Six parameters, such as the extraction temperature, equilibrium time, extraction time, desorption time, injector temperature and solution of salting out, were optimized by exposing the 65 microm polydimethylsiloxane-divinyl-benzene (PDMS-DVB) fiber to the headspace of magnetically stirred (600 r/min) sample. According to the results of the optimization experiments, the following conclusion can be drawn: The water-diluted sample in a 10 mL headspace-vial was efficiently extracted for 20 min after the system was equilibrated for 3 min at 60 degrees C. After extraction, the fiber was immediately inserted into the GC injector and desorbed at 250 degrees C for 3 min. The spiked recoveries were in the range of 82.0% - 103.3% and the relative standard deviations (RSDs) were between 1.8% and 9.4%. Meanwhile, the limits of detection (LODs) ranged from 0.6 ng/g to 2.1 ng/g. This method is characterized by rapidity, high sensitivity, good linearity and repeatability for all the target compounds. It is applicable to the analysis of synthetic musks in perfumes.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.