Abstract

A generic iterative empirical model to compute the effective permittivity (e eff ) and resonant frequency (f r ) of microstrip patch antenna (MPA) covered with multi-layered superstrates is reported. For an MPA covered with multi-layers of superstrate the presented technique makes use of conformal mapping (CM) of dielectric boundaries and series-parallel combination of capacitances between the metallic patch and ground plane to determine e eff . The developed model can accurately predict e eff and f r of multi-layered superstrate structure with permittivity greater than 4.5 which is higher than the previous state-of-the-art (i.e. e r >2.32). It can predict f r of an MPA with relative %error of 1.6% and 0.1% for superstrate having permitivities of 3.66 and 4.7 respectively for considerably thicker superstrates. The presented theory is validated by developing prototypes and a good agreement between the measured and the simulated results confirm this premise. In essence, the technique presented is first of its type to anticipate f r of an MPA covered with superstrate layers of relatively higher permitivities with very small relative %error than the previous works. An algorithm to integrate the developed model with any standard microwave simulator is also proposed. Finally, the proposed theory is applicable for wearable sensors with antenna in it and covered with dielectric superstrate for protection from the environment.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.