Determination of cadmium in indium phosphide by electrothermal atomic absorption spectrometry and ion-selective electrode potentiometry

Abstract

Two independent methods for the determination of cadmium in cadmium-doped indium phosphide have been developed. Electrothermal atomic absorption spectrometry (ETAAS) utilized both platform atomization and a chemical modifier composed of magnesium nitrate and orthophosphoric acid. As the matrix mass was found to influence the cadmium sensitivity, matrix matched calibration standards were necessary. The detection limit (3sB) is 0.20 μg/g for a 100 mg sample. The electrochemical method employed a solid-state cadmium sulfide-silver sulfide electrode as potentiometric sensor. An excess of indium (III) influenced the electrode response. A preliminary chelation-extraction of indium with acetylacetone at pH 5.0 in acetate buffer overcame the interference. The detection limit of the ISE-potentiometric method is 10 μg/g for a 200 mg sample. Two indium phosphide single crystals grown from melts doped with cadmium sulfide or cadmium telluride were analyzed for their cadmium content.