Abstract

A gas-phase on-fibre derivatisation method for the determination of putrescine and cadaverine by gas chromatography/mass spectrometry using trifluoroacetylacetone (TFAA) has been studied and optimised. Small amounts (2μl) of putrescine, cadaverine and TFAA standards were vaporised at high temperature in a 20cm3 closed SPME vial. The subsequent derivatives were recovered from the headspace of the vial using a PDMS/DVB fibre. The optimised mole ratio for [TFAA]/[Putrescine+Cadaverine] reaction was 22.3/1 with a derivatisation and extraction temperature of 120oC and an extraction time of 20min. The retention times for the derivatised putrescine and cadaverine were 20.5 and 22.2min, respectively on a capillary column, CP-Sil 8CB; 30m length×0.25mmi.d.×0.25μm film thickness. The correlation coefficients (R2) of calibration curves for putrescine and cadaverine were 0.999 and 0.997, respectively over a range of sample masses of 20–350ng, using nonadecane as an internal standard. Putrescine and cadaverine recoveries were determined to be 93.9% and 103.3%, respectively. The method was found to be a straightforward single step procedure that was unaffected by complex sample matrices and was successfully tested on samples of meat, vegetables and cheese.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call