Abstract

High rate algal ponds (HRAP) are an alternative to conventional wastewater treatment with the potential for wastewater and biomass reuse. In this study, we report the development and validation of methods for analysing 18 bisphenols (BPs) in the aqueous and biomass phase of HRAP. For aqueous phase samples, obtained LLOQ ranged from 10 to 30 ng/L, and recoveries from 78% to 106%. The relative expanded uncertainty was highest at the lowest spiking level (100 ng/L) and ranged from 27% to 66% (BPA), while for the biomass, the LLOQ ranged from 25 to 75 ng/g dw, recoveries from 84% to 103%. The uncertainty ranged from 16% to 37% (BPA). On average, the influent contained 329, 144, and 21 ng/L of BPA, BPS and 4,4′-BPF, and the effluent 69 ng/L, 94 ng/L and <LLOQ, respectively. Only BPA was quantified in the algal biomass. The average removal of BPA was 80%, whereas the removal efficiency of BPS was 32%. To our knowledge, this is the first study analysing a wide range of BPs in both aqueous and biomass phase of HRAP treating real wastewater.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call