Abstract
Power is the most important energy in the current society, so it is very important to ensure the stable operation of the power system. In order to determine the state of the circuit breaker in the power system effectively, the power supply is stable. This paper presents a method to determine the ablation degree of the contact of the circuit breaker based on the radiation electromagnetic wave detection. The method adopts the means of electrical measurement and waveform observation to realize the rapid diagnosis of the contact ablation degree of the circuit breaker. The antenna is used to receive the radiated electromagnetic wave generated in the opening process of the circuit breaker, and the common oscilloscope is used to monitor the waveform. The number of electromagnetic wave pulses per unit time is analyzed to determine the ablation degree of the circuit breaker contact. If the number of pulses found by oscilloscope is large, it can be judged that the contact ablation is serious. The method mentioned in this paper belongs to the field of electrical engineering, which is mainly used to determine the ablation degree of the contact of the circuit breaker by means of electrical detection. This method has the advantages of simplicity, rapidity and efficiency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
