Abstract

A simple and accurate analytical method for the determination of acaricides in honey was developed and validated in accordance with Japanese validation guidelines. Analytes – amitraz, N-2,4-dimethylphenyl-N-methylformamidine (DMPF), etoxazole, fenpyroximate, fipronil, hexythiazox, propargite, pyridaben and spirodiclofen – were extracted with ethyl acetate under basic conditions and subsequently cleaned up using an InertSep® MA-1 polymer-based anion-exchange column. The method was validated by fortified recovery tests at three different concentrations (1, 5 and 10 µg kg−1) performed with three samples daily on five different days. The method exhibited recoveries of 77–116% and precision (relative standard deviations – RSDs) of repeatability and within-laboratory reproducibility ranged from 2% to 22% and from 3% to 23%, respectively. The sample solution was successfully cleaned up to enable quantification using external solvent calibration curves. The limits of quantification (LOQs) were estimated to be 1 µg kg−1 for all analytes. The method was applied to honey samples commercially available in Tokyo, Japan. Analysis of 250 honey samples indicated that amitraz was present in 127 samples, and that its residual concentration was less than 20 µg kg−1. Propargite was detected in 23 samples at concentrations less than 1 µg kg−1.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.