Abstract

Task-based respirable crystalline silica (RCS) exposure monitoring data was collected from construction work sites across 3 Canadian provinces: Alberta, British Columbia (BC), and Manitoba. In total 373 RCS samples were obtained from 70 worksites across 44 companies. Sampling was conducted between May 2015 and August 2020. The overall geometric mean (GM) RCS exposure was 0.045 mg/m3 (geometric standard deviation, GSD = 6.8). Alberta had the highest average exposure and the highest variability with GM of 0.060 mg/m3 (GSD = 9.3), the GM in BC was 0.044 (GSD = 4.3), and in Manitoba the GM was 0.033 (GSD = 7.0). A multivariable model was built using forward stepwise linear regression modeling. Province, task type, work environment (indoor vs. outdoor), construction material, sampling duration, and engineering control use were all statistically significant predictors of exposure level in partial F-tests (P < 0.05). Overall, the model explained 42% of the RCS concentration variability. Task type contributed most to the model's explanatory power. The task type with highest average exposure levels was demolition (GM 0.30 mg/m3, GSD 0.49). Breaking (GM 0.16 mg/m3, GSD 8.4) and grinding (GM 0.081 m/m3, GSD 7.4) also had high-exposure levels. Working outdoors was associated with exposure levels 39% lower than indoors. Exposure control measures such as local exhaust ventilation and wetting were also associated with lower exposure levels. Among construction materials, Cement, sand, and stone were associated with higher RCS exposure levels relative to the reference material, concrete. The results of this study indicate that workers in western Canada remain exposed to RCS at levels that exceed the health-based American Congress for Governmental Industrial Hygienists Threshold Limit Value of 0.025 mg/m3. Although there were some differences in exposure levels between the provinces, the determinants of exposure were similar in all 3. The overall GM RCS exposure was 0.045 mg/m3 (geometric standard deviation, GSD = 6.8). Alberta had the highest average exposure and the highest variability with GM of 0.060 mg/m3 (GSD = 9.3), the GM in BC was 0.044 (GSD = 4.3), and in Manitoba the GM was 0.033 (GSD = 7.0).

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.