Abstract

Existing research on rock freeze-thaw mainly focuses on a single freeze-thaw process, while little attention is paid to the cumulative effect of cyclic freeze-thaw on rock mass joints. However, the accumulated freeze-thaw effects are precisely the leading cause of rock mass deterioration and damage in severe cold regions. This study aims to investigate the use of a novel laboratory testing method, i.e., membrane pressure sensors in the joint, to demonstrate the impact of cyclic frost-thaw on jointed rocks. With the sensors, the change of frost-heaving pressure in the joint under cyclic process is continuously monitored. The measurements indicate that under freeze-thaw cycles, the initiation of frost-heaving pressure is critical, which is followed by an explosion, stability, and ablation stages. In these stages, the maximum frost-heaving pressure is observed to emerge at the early stage of the freeze-thaw cycle. Based on the experimental observations, frost-heaving pressure evolution law and damage mechanism of jointed rock masses are analyzed. For example, the peak frost-heaving pressure increases exponentially with the decrease of temperature and decreases exponentially with the increase of freeze-thaw cycles. Also, the pressure has a positive linear relationship with the geometric size of the joint. In essence, the deterioration of freeze-thaw cycles on jointed rock masses is mainly due to crack propagation caused by the frost-heaving pressure.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.