Deterioration evolution mechanism and damage constitutive model improvement of sandstone–coal composite samples under the effect of repeated immersion

Abstract

Underground reservoirs in coal mines, consisting of goafs (By goaf, we mean the space that remains underground after the extraction of valuable minerals), are commonly utilized for mine water storage and drainage, with their primary load-bearing structures being the “roof–coal pillar” systems. Consequently, this structure must endure the repeated immersion behavior resulting from fluctuations in the mine water level, resulting in the risk of geological disasters. This paper analyzes the variation in mechanical properties of sandstone–coal composite samples after repeated immersion cycles through axial loading tests. The results indicate that the water content of the sample exhibits a notable and rapid increase with each successive immersion cycle. This corresponds to a decrease in the stress threshold and modulus parameters of the samples. Moreover, the acoustic emission signals serve as indicators of the softening characteristics of the samples. With the increase in immersion cycles, there is an augmentation in both the frequency and extent of shear cracks. The non-linear failure characteristics of the samples become more pronounced. Consequently, water significantly weakens the cementing material between rock grains. Both sandstone and coal display a decrease in deformation resistance capabilities at a macroscopic level. The constitutive model of the composite sample was improved based on the degradation characteristics of mechanical strength and strain energy parameters, which offers enhanced accuracy in analyzing the degradation process caused by water immersion. This paper offers a crucial theoretical foundation for comprehending the deterioration evolution characteristics of the “roof–coal pillar” bearing structure affected by repeated immersion.