Abstract
We have studied distinctive features of the response of a fibre-optic current sensor with a spun-fibre sensing loop to short current pulses. It has been shown theoretically that, in a reflective interferometer, the polarisation mode dispersion (PMD) in the sensing spun fibre has no effect on the pulsed output signal of the sensor, in contrast to the PMD in a connecting fibre line. The response of the current sensor to a rectangular pulse has linear edges and its duration is determined by the relationship between the current pulse duration and the light propagation time in the spun fibre. The transition from a linear edge to the maximum sensor response is not accompanied by any transient process. The maximum response amplitude corresponds to the response to an equivalent direct current at a current pulse duration exceeding the light propagation time in the spun fibre. The present calculation results and experimental data agree well for current pulses longer than 300 ns at a light propagation time in the spun fibre of ~1 μs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
