Detection of Coal Bust Risk in a Kilometer Depth Workface with Hard–Thick Roof Based on Active–Passive Seismic CT

Abstract

Practice and theory research proved the “square effect” during longwall mining with hard–thick strata lying on the coal seam, which could cause severe underground pressure and even dynamic disasters, such as coal burst; therefore, it became a key area and stage that need special attention. The combined active–passive seismic computed tomography (CT) was introduced to detect the abutment stress concentration in the coal seam. The results of active–passive CT inversion show that the “square effect” appears as early as the workface ahead of the theoretical position of 50 m with a 100 m significant influencing zone, which provides a strong guarantee for accurate risk evaluation of coal burst. Precursor information before the “square effect” can be identified based on the everyday total energy of mining tremors, which had period peaks in this case. The everyday average energy of mining tremors indicates that the seismic type during the “square effect” stage belonged to a foreshock–mainshock pattern. The combination of the seismic events and CT can improve the accuracy of coal burst danger distinguishing notably. The research can provide worthwhile guidance for the monitoring and prevention of coal burst hazards in similar conditions.