Detecting naphthenic acids in oil sands process water with microbial electrochemical sensor: Impact of inoculum sources and quorum sensing autoinducer

Abstract

This study presents the inaugural demonstration of a microbial electrochemical cell (MXC)-based biosensor for naphthenic acids (NAs) detection in oil sands process water (OSPW) from a mining site. During the calibration process, different operating parameters were evaluated, including standing times (3 – 12 hours) and charging durations (5 – 20 minutes) within the charging-discharging cycles. The observations ascertained that a combination of a 12-hour standing period followed by a 15-minute charging period yielded the optimal current output when measuring NA concentrations ranging from 4.98 to 24.9 mg/L in real OSPW samples (diluted to concentrations of 20–100 %). Subsequently, incorporating diverse inoculum sources from MXCs led to significant signal output improvements, with one sustained on a mixture of cyclohexane carboxylic acids, commercial naphthenic acids, and real OSPW, and another exposed to acetate medium for over four years. Moreover, integrating quorum sensing (QS) autoinducers (10 μM) increased the current generation, highlighting the potential for more sensitive detection capabilities. Ultimately, our MXC biosensor could enable a cost-effective and rapid detection of OSPW NAs, offering a potential alternative for environmental surveillance.