Detecting Background Leakages in Water Infrastructure With Fiber Optic Distributed Temperature Sensing: Insights From a Heat Transfer-Unsaturated Flow Model

Abstract

The use of fiber optic distributed temperature sensing (DTS) to detect and locate leaks is still in its infancy in water infrastructure, despite its promising capabilities. Only few experiments tested this technology, and none of these studies focused on small but persistent leaks, like background leakages, which are ubiquitous and generally go undetected with the technology currently available, thus posing a serious threat to the available water resource. To test the feasibility of detecting and locating background leakages with fiber optic DTS, this study provides a detailed analysis on flow and temperature alterations around leaking water pipelines in presence of small leaks (5, 25, and 125 L/d) with small to moderate temperature differences with the surrounding soil, under 3 different pipe defect configurations, either in absence or in presence of pipe thermal insulation. Transient 3D heat transfer-unsaturated flow numerical simulations showed that there is potential to use temperature alterations to detect and locate incredibly small leaks with fiber optic DTS, like background leakages, despite the influence of pipe temperature on the surrounding soil. The analysis showed that extent, distribution, and magnitude of these alterations are convection dominated at a given temperature difference between leaked water and undisturbed soil, and that it may not be strictly necessary to place the optical fiber directly below the pipe. Indeed, optical fibers located within the utility trench at the sides of the pipe and below its bottom showed comparable or even better performance, thus giving new opportunities to retrofit existing pipelines as well.