Detailed Heat Transfer Distributions of Narrow Impingement Channels With Varying Jet Diameter

Abstract

The development of integrally cast turbine airfoils allows the production of narrow impingement channels in a double-wall configuration, where the coolant is practically injected within the wall of the airfoil providing increased heat transfer capabilities. This study examines the cooling performance of narrow impingement channels with varying jet diameters using a single exit design in an attempt to regulate the generated crossflow. The channel consist of a single row of five inline jets tested at two different channel heights and over a range of Reynolds numbers. Detailed heat transfer coefficient distributions are evaluated over the complete interior surfaces of the channel using the transient liquid crystal technique. Local jet discharge coefficients are determined by probe traversing measurements for each individual jet. A 10%-increasing and a 10%-decreasing jet diameter pattern is compared with a baseline geometry of uniform jet size distribution indicating a considerable effect of varying jet diameter on the heat transfer level and the development of the generated crossflow.