Detailed electromagnetic numerical evaluation of eddy currents induced by toroidal and poloidal magnetic field variation and halo currents

Abstract

A detailed evaluation of the EM loads in the ITER divertor during plasma disruptions is mandatory for the correct dimensioning of the divertor component. The EM loads during plasma disruptions are mainly produced by: (1) toroidal flux variation (TFV) during the thermal quench (TQ) and current quench (CQ); (2) halo currents (HC); and (3) poloidal flux variation (PFV) during TQ and CQ phase. The new ITER reference disruption and the last changes in the divertor design have been considered in the EM models created to calculate all the EM loads due to TFV, HC and PFV. All the analyses have been performed for the three different main design options of the divertor plasma facing units (PFU). The effects of PFV have been analyzed using an EM-zooming procedure that has allowed a good detail of the component model, while new numerical approaches have been developed for the evaluation of the effects due to TFV and HC maintaining the same detail for the divertor model. Separate models have been developed to evaluate the equivalent electrical resistivities of the various PFU options; this allows in the full 3D model a strong simplification of a geometry which would otherwise be very complex. The effect of an electrical surface bridging of the PFU castellation has also been taken into account.