Abstract
This paper aims at determination of mechanical properties of 28 years old concrete with various nondestructive and destructive testing methods. All investigated parameters were determined on drilled cores with diameter 79.8 mm gained from existing bridge. On these samples Schmidt rebound testing and destructive force loading test were performed. Static (from loading test) and dynamic (measured by ultrasonic device) modulus of elasticity was also measured. The evaluation of destructive and nondestructive testing was according to the Czech Standards. Testing of old concrete from real structures is important especially prior to the reconstruction, strengthening or repair of the structure, when the structural engineer needs to know the characteristics. The compressive strength measured destructively on cylinders achieved average value 28 MPa, while the Schmidt rebound hammer test showed strength 44 MPa. The average value of static modulus of elasticity was 26 GPa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
