Abstract

Amorphous iron hydroxide-based material was selected as a suitable adsorbent for the siloxanes from biogas and landfill gas. The adsorptive characteristics of the desiloxanation (DeSiloxs) process were studied through a lab-scale experiment using a simulated gas containing a mixture of siloxanes (D4, and D5) and a field experiment on an actual environment scale. The iron hydroxide-based adsorbents exhibited high activity in adsorption of siloxanes during lab-scale experiments, where the obtained adsorption capacity was about 26.3 % with N2 as a carrier gas. However, from an applicability point of view, the effectiveness of the siloxane removal process was significantly affected by the space velocity during the in-situ test in anaerobic digestion gas plant using wastewater sludge. In the experimental case of various space velocities (50, 100, 300 h−1), a very high removal efficiency (100 %) was obtained.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.