Designing in-situ carbon-coated mixed phase iron oxides anode coupled with a heteroatom doped porous carbon cathode for lithium-ion capacitors

Abstract

Lithium-ion capacitors (LICs) are promising devices to balance the space between lithium-ion batteries and supercapacitors by merging the battery-type anode and capacitor-type cathode materials in a single device. This work represents a lithium-ion capacitor containing in-situ carbon coating on mix-phase iron oxide from ferrocene as an anode and heteroatom-doping on porous carbon as the cathode. This type of cathode facilitates better wettability and a good contact area between the electrode and electrolyte, leading to a capacitance of 154 F g−1, retaining 76 % capacitance after 10,000 cycles at 1 A g−1. In contrast, the anode half-cell exhibits 545 mAh g−1 at 1 A g−1 and ∼76 % retention in capacity after 2000 cycles. This is because of nano-structuring and mix-phase iron oxide, allowing a conversion-type reaction to store Li-ions at a high rate, and carbon coating provides electronic conductivity and structural strength upon cycling. The full cell LIC demonstrates energy densities of 91 and 65 Wh kg−1 at power densities of 467 and 9350 W kg−1, respectively. This hybrid device can retain ∼77 % specific capacitance at 1 A g−1 for 5000 cycles. Furthermore, this study analyzes the practical application of LICs by evaluating impedance, self-discharge, and leakage current characteristics.