Abstract

A miniaturized microstrip dual-band bandpass filter (DBPF) with two T-shaped resonators is proposed. The two T-shaped resonators lead to multiple transmission zeros in the stopband and higher filter selectivity. The filter is analyzed using LC and even/odd mode analyses to determine the transmission zeros. The LC equivalent circuit and transfer function are presented. The proposed filter is symmetrical, so the electrical length and impedance values are used for odd/even mode analysis. The designed DBPF is centered at 1.9/5.54[Formula: see text]GHz and is suitable for WLAN applications. The insertion loss of the filter is less than 0.5[Formula: see text]dB and its return loss is more than [Formula: see text][Formula: see text]dB in each band. Five transmission zeros are created with an attenuation greater than [Formula: see text][Formula: see text]dB. The total area of the proposed filter is [Formula: see text][Formula: see text]mm2. To validate the proper performance of the proposed filter, it is fabricated and measured.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.