Abstract
Three-dimensional (3-D) integration is an attractive technology to reduce wirelengths in a field-programmable gate array (FPGA). However, it suffers from two problems: one, the inter-layer vias are limited in number, and second, the increased power density leads to high junction temperatures. In this paper, we tackle the first problem by designing switch boxes that maximize the use of the vias. Compared to the previously used subset switch box, our best switch box reduces the number of vias by about 49% and area-delay product by about 9%. For the second problem, we utilize the difference in power densities between CLBs and some of the hard blocks in modern FPGAs to distribute the power more uniformly across the FPGA. The peak temperature in a two-layer FPGA reduces by about 16degC after our change.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
