Design technique of highly efficient technological processes for preparation of polymeric composite parts for adhesive bonding

Abstract

This paper presents the results of technological machining of polymer composite parts with the flexible flap wheels for further adhesive bonding. The peculiarities of polymer composite materials and their application field are revealed. Constructions that use polymer composite material parts are described.The article identifies the process of gluing parts made of polymer composites, as well as features of ensuring the strength of the adhesive joint after mechanical processing of bonded parts.Methodology of modes processing selection and structural-geometric tool parameters for the processing of surface parts under the adhesive bonding is elaborated. Theoretical studies of processing the polymer composite parts with the help of flap wheels are conducted. The surface roughness model is developed. A considerable amount of experimental research has been carried out. The tools for machining and cutting modes are selected. The strength of the glue connection of the details processed by the flap wheels is examined. To compare the durability of the received glue connections and the combinations executed according to the factory technology, the reference surfaces of the samples used at comparative control of quality sanding are investigated. The theoretical and experimental results are compared. Their high convergence is established. The adequacy of the theoretical dependence in compliance with the Fisher criterion is checked. Effective methodology for designing highly efficient technological processes tested in industrial conditions is presented. It allowed to reduce the processing time in more than 2 times, while providing the high strength adhesive bonds.