Abstract
Although oscillating water column (OWC) wave energy converters are arguably one of the most studied technologies, it is not clear which chamber geometry, among all of the available alternatives, would provide the best performance at a site of interest. In this work, a numerical model based on the Navier-Stokes equations for two compressible fluids, using a volume-of-fluid interface-capturing approach, is implemented to determine the best performing OWC geometry in a case study off the Port of Vigo (NW Spain). Four general shapes of OWC are analyzed: classic, stepped-bottom, U-shaped and L-shaped, and geometrical variants are investigated. In total, 18 chamber geometries are studied, considering the same turbine geometry in all of them. It was found that the U-shaped and L-shaped designs are the most easily tuned to resonate at a period of interest. Of these two, the L-shaped performs better. The best performance is achieved for an L-shaped OWC design with a shallow entrance, a high horizontal chamber duct and a wide vertical duct, for which a maximum capture-width ratio of 71.6% was achieved.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
