Abstract
A design-oriented analysis (DOA) method is presented, which lends sufficient insights into various Miller compensation schemes. The method predicts the nondominant poles of the Miller-compensated amplifiers in an intuitive manner, and it serves as a good supplement to the conventional analysis. The usage of DOA is verified by the various design examples given in this paper. Guided by DOA, a multistage amplifier capable of driving a large-capacitive load ( $C_{L}$ ) with low power consumption is presented. This amplifier employs an active zero to extend its Miller loop bandwidth, thereby pushing the amplifier’s nondominant poles to high frequencies and achieving larger gain bandwidth (GBW). Fabricated in a 0.18- $\mu \text{m}$ CMOS process, the amplifier achieves 1.18-MHz GBW and 59.6° phase margin when driving an 18-nF $C_{L}$ , while consuming 69.6 $\mu \text{W}$ from a 1.2-V supply. The design shows improved figures-of-merit compared with the prior state-of-the-art Miller-compensated multistage amplifiers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
