Design Optimization of a THz Receiver Based on 60 nm Complementary Metal–Oxide–Semiconductor Technology

Abstract

The technology transfer of terahertz wireless communication from research laboratories to commercial applications is a global strategic achievement currently pursued to match the ever-increasing demand for high-speed communication. The use of commercial integrated electronics for the detection of THz waves is an intriguing challenge which has enticed great interest in the scientific research community. Rapid progress in this field has led to the exploitation of THz direct detection using standard CMOS technology based on the so-called self-mixing effect. Our research, stemming out of a collaboration between Sapienza University of Rome and STMicroelectronics company, is focused on the complete design process of a THz rectifier, realized using 50 nm ST B55 CMOS technology. In this paper, we report the optimization process of a case-study receiver, aimed to demonstrate the feasibility of direct demodulation of the transmitted OOK signal. A relatively limited bandwidth extension is considered since the device will be included in a system adopting a radiation source with a limited band. The design refers to a specific technology, the 60 nm MOS in B55X ST; nevertheless, the proposed optimization procedure can be applied in principle to any MOS device. Several aspects of the rectification process and of the receiver design are investigated by combining different numerical simulation methodologies. The direct representation of the rectification effect through the equivalent circuit of the detector is provided, which allows for the investigation of the detector–amplifier coupling, and the computation of output noise equivalent power. Numerical results are presented and used as the basis for the optimization of the receiver parameters.