Design of Ultra-Wideband Bandpass Filters With Fixed and Reconfigurable Notch Bands Using Terminated Cross-Shaped Resonators

Abstract

In this paper, a novel terminated cross-shaped resonator (TCSR) is analyzed and used to design ultra-wideband (UWB) bandpass filters (BPFs) with fixed and reconfigurable notch bands. It is found that the TCSR can exhibit a maximum three poles and two zeros when open and short terminations are applied. The intrinsic zero is simply used for the implementation of notch bands offering systematic design and flexible tuning capabilities. Bandwidth can also be kept unchanged when tuning a notch within the UWB passband. In contrast to common band-notched UWB BPFs using additional notch resonators, only a single TCSR is required to realize band-notched UWB filters. Three UWB BPF prototypes, including a four-pole filter with 94.7% fractional bandwidth (FBW) and a notch band at 5.8 GHz, a five-pole filter with 111% FBW and dual notch bands at 4.3/9.1 GHz, and a four-pole filter with 82.4% FBW and reconfigurable notch band from 4.6 to 6.5 GHz are designed and experimentally characterized. Their experimental characterizations are in good agreement with theoretical analysis validating a simple approach of band-notched UWB BPF design.