Abstract
Few Ti alloys have been designed for ease of sintering. This paper considers the design of alloys for processing using the mixed elemental technique, in which powders are mixed, cold pressed in a die to near net shape and sintered under vacuum at high temperature. The authors describe steps in the process of developing a Ti–Ni–Sn alloy, able to be sintered to near full density at a sintering temperature as low as 1100°C without requiring unusually fine powder or high compaction pressure. Higher sintering temperature allows the Ni content of the alloy to be reduced, but swelling of the alloy probably imposes an upper limit on practical sintering temperature. The increase in green density, and hence sintered density, conferred by Sn in Ti–Sn alloys, and the increase in sintered density due to the high diffusivity of Ni in Ti–Ni alloys, are combined in Ti–Ni–Sn alloys.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
