Abstract
Abstract A superhydrophobic and oleophobic surface was demonstrated on Zn substrate via a composite method using chemical etching, hydrothermal reaction, and fluorinated modification. The surface morphology with aligned ZnO rods that grew almost perpendicularly on Zn substrate and had flat hexagonal crystallographic planes played a key role in the achievement of the superhydrophobicity and oleophobicity. The Zn surface with aligned ZnO rods was then made superhydrophobic and oleophobic with maximum distilled water and peanut oil contact angles (CAs) of 152° and 146°, respectively, by further fluorinated modification, and the sliding angle (SA) for distilled water was less than 10°. Moreover, on the basis of the classical models (Wenzel's and Cassie's model), an improved model was established to analyze the influence of the surface morphology on the wettability. The effect of the experimental parameters including the hydrothermal temperature and the concentration of the chemical etching agent on the surface morphology and the wettability were examined, and then the optimum parameters were obtained. This method is simple and inexpensive, and has potential application in depositing Zn coating that can provide both corrosion resistance and oleophobicity to the substrate metals.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have