Design of Safe Well on the Top of Atharamura Anticline, Tripura, India, on the Basis of Predicted Pore Pressure from Seismic Velocity Data

Abstract

Abstract Pore pressure prediction is essential part of wildcat well planning. In India, Tripura sub – basin is characterised by huge anticlines, normal faults and abnormally pressured formations. These factors push the wildcat well planning in this area into wide margin of uncertainty. Pore pressures were predicted from seismic velocities by using modified Eaton’s method over the synclinal and flank part of Atharamura to understand the pressure succession towards the anticline. These predicted pore pressure on the flank part lead to a reasonable match when plotted with offset well measured pore pressures. To reduce the uncertainty fracture pressure were established by various methods such as Hubbert & Willis method and Matthews & Kelly method from predicted pore pressures. But the fracture pressures were predicted with available horizontal stress correlations due to lack of Poisson’s ratio curve for the study area. The mud pressure required to drill the well is calculated using median line principle and hence drilling mud window is established by assuming virtual tight conditions. The plot of Equivalent Circulation Density (ECD) versus depth suggest that well can be drilled with two casing policy. But it is found that adding one more casing pipe will ensure the safety of well. Casing pipes were designed on the basis of collapse pressure, burst pressure and tensile load. Finally a well plan which includes pore pressure, fracture pressure, drilling mud policy, casing policy, kick tolerance graph were proposed to give clear picture on well planning on the top of the anticline in pore pressure point of view.