Design of redundant robot painting system for long non-regular duct

Abstract

Purpose – The purpose of this paper is to design a special automatic redundant robot painting system (RRPS), which can automatically navigate and paint in the long non-regular duct. Design/methodology/approach – The RRPS is designed with three subsystems: a redundant robot, a spraying system and a control and safety system. Based on the modular design theory, the robot falls naturally into a mobile platform, a 4-DOF location mechanism and a 10-DOF manipulator. The restriction of the distance between the links and the duct axis is used to plan the trajectory of the manipulator so that it would not collide with the duct. The restriction model is constructed by minimizing the sum of the weighed distances between the duct axis and the special points. Findings – A fully working prototype system has been developed. Test results show that the minimal distance between the robot joints and duct is 18 mm, and it can finish painting long non-regular ducts at the speed of 12.5 cm/s and the spraying distance of 16 cm. The quality of coating layers is good. Practical implications – The RRPS was used to paint non-regular rectangular ducts, cylindrical ducts and long non-regular ducts. The feasibility of painting long non-regular duct is proved with the prototype implementation and successful test results. Originality/value – The RRPS shows a novel solution that is based on the 14-DOF redundant robot design for painting long non-regular ducts which is used in airplane.