Abstract
We propose a method for developing new quaternary Ir-Nb-Ni-Al refractory superalloys for ultra-high-temperature uses, by mixing two types of binary alloys, Ir-20 at. pct Nb and Ni-16.8 at. pct Al, which contain fcc/L12 two-phase coherent structures. For alloys of various Ir-Nb/Ni-Al compositions, we analyzed the microstructure and measured the compressive strengths. Phase analysis indicated that three-phase equilibria—fcc, Ir3Nb-L12, and Ni3Al-L12—existed in Ir-5Nb-62.4Ni-12.6Al (at. pct) (alloy A), Ir-10Nb-41.6Ni-8.4Al (at. pct) (alloy B), and Ir-15Nb-20.8Ni-4.2Al (at. pct) (alloy C) at 1400 °C; at 1300 °C, three phase equilibria—fcc, Ir3Nb, and Ni3Al—existed in alloys A and C and four-phase equilibria—fcc, Ir3Nb, Ni3Al, and IrAl-B2—existed in alloy B. The fcc/L12 coherent structure was examined by using transmission electron microscopy (TEM). At a temperature of 1200 °C, the compressive strength of these quaternary alloys was between 130 and 350 MPa, which was higher than that of commercial Ni-based superalloys, such as MarM247 (50 MPa), and lower than that of Ir-based binary alloys (500 MPa). Compared to Ir-based alloys, the compressive strain of these quaternary alloys was greatly improved. The potential of the quaternary alloys for ultra-high-temperature use is also discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have