Abstract
A design method of programmable transmitarray with independent controls of transmission amplitude and phase is proposed in C-band. The unit cell with cascaded structures mainly consists of four parts, including the receiving antenna, reconfigurable attenuator with PIN diodes, reconfigurable phase shifter with varactors and transmitting antenna. Correspondingly, various manipulations of spatial electromagnetic (EM) fields are achieved by varying the bias voltages of PIN diodes and varactors in the transmitarray. The fabricated unit cell is measured in a standard waveguide, and the whole array with 8*8 unit cells is measured with two horns for calibration of the programmable EM features. The experimental results show that the transmission magnitude can range from -16 dB to -3.6 dB and the transmission phase achieves 270-degree coverage independently under the 16-bit programmable control. To further exhibit the capability and functionality of the proposed transmitarray, the waveform engineering of adaptive beamforming and power-allocation beamforming are separately realized in the experiment. The measured results have good agreements with our theoretical calculations, verifying the validity of our design method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have