Design of Non-Intrusive Online Monitoring System for Traction Elevators

Abstract

With the increase in elevator usage, more and more elevator real-time monitoring equipment is being applied to the operation of elevators. Traditional elevator monitoring equipment adopts a multi-sensor decentralized installation and layout, and the monitoring accuracy is low, which directly affects the effective alarm of the monitoring system; however, existing online monitoring systems cannot quickly alarm for faults. Aiming to solve the above problems, an elevator online monitoring system based on narrow-band Internet of Things (NB-IoT) is designed. The system is highly integrated with an STM32 main control chip, a six-axis acceleration gyroscope sensor, and an air pressure sensor to realize the edge calculation of the monitoring system. At the same time, this paper eliminates the temperature drift of the pressure sensor by using a temperature compensation algorithm and inputs the extracted characteristic parameters into the BP neural network for training to eliminate the zero drift so as to obtain the real-time height data of the elevator. The six-axis acceleration gyroscope sensor is used to calculate the posture so as to avoid the problem that a three-axis acceleration sensor or a three-axis gyroscope sensor alone cannot obtain accurate posture data. In order to further improve the monitoring accuracy, the peak-to-peak value of the signal is calculated by using a 95% confidence interval algorithm to reduce the suppression of the high-frequency components of the signal by noise and ensure that the signal has a large signal-to-noise ratio so that the obtained elevator car posture and vibration operation data are more accurate. Finally, the effectiveness of the proposed method is verified by experiments.